Ready for a showroom shine?Book now
  1. Home
  2. Services
  3. Polishing & paint correction
Services

Polishing & paint correction

Machine polishing removes swirls, haze, oxidation and light scratches from your clear coat, bringing back the depth and clarity of day one.

One-step or multi-stageBy machine, under detailing lightsIdeal before a coating
Teal BMW coupé with mirror-like paint after polishing
In shortPolishing removes a microscopically thin layer of the clear coat by machine. Swirls, holograms, haze and light scratches are levelled out, so the paint reflects light crisply again. A one-step polish gives a big gloss improvement; a multi-stage correction gets the most out of the paint. Scratches that go through the clear coat can't be polished out.

What is paint correction?

Almost every car has fine scratches in the paint after a few years: circles you see in the sun or under a lamp, a dull haze, or light scratches from a sponge or brush. With a polishing machine, the right pad and the right compound we level the top layer of the clear coat. The defects disappear and the surface becomes smooth again: that's exactly what you see as depth and gloss.

What can we remove?

  • Swirls and holograms. The circular scratches from car washes, poor washing or earlier bad polishing.
  • Haze and oxidation. Dull, weathered paint, especially on older cars and red or dark colours.
  • Water spots. Mineral rings that have etched into the paint.
  • Light scratches. Scratches that are only in the clear coat.

One-step or multi-stage?

One-stepMulti-stage
GoalBig gloss improvementRemove as many defects as possible
SwirlsLargely reducedVirtually all gone
SuitsCars in reasonable conditionDull paint, heavy swirls, show level
TimeShorterLonger

The right approach depends on the condition of your paint and what you want. We always do a test section first and discuss the result with you.

What polishing can not do

A scratch that goes through the clear coat (into the base colour or primer) can't be polished out; that needs paintwork. A rule of thumb: if your fingernail catches in the scratch, it's often too deep to disappear completely. Polishing can still make it far less visible.

How we do it

  1. Wash and decontaminateA thorough hand wash plus iron fallout and clay treatment, so no grit gets under the polishing pad.
  2. Inspection and test sectionUnder detailing lights we look at the defects and choose the right pad and compound combination.
  3. PolishPanel by panel, controlled, without removing more clear coat than necessary.
  4. Finish and protectPolishing residue off, then a sealant or ceramic coating to lock in the gloss.

Afterwards: protect it

Freshly polished paint is bare and deserves protection. A ceramic coating is the most durable choice; a sealant is a good short-term alternative. And to keep the swirls from coming back, read swirl marks in your paint: cause and fix.

Frequently asked questions

Does polishing make my paint thinner?
Yes, minimally: a microscopic layer of clear coat is removed. That's why we work in a controlled way, start as gently as possible and don't polish more often than needed. With good protection and the right washing method it won't need doing again for years.
Will every scratch come out?
Scratches in the clear coat usually do. Scratches into the base colour or primer can be made less visible, but not removed completely.
What's the difference between polishing and waxing?
Polishing corrects the paint (it removes defects). Wax or a coating protects the paint (it adds a layer on top). For the best result you do the first, then the second.

Ready for a showroom finish?

Send us a message about your car, its condition and what you'd like done. We'll come back with a plan and a tailored price.